D-Link xStack DES-3526 Cli Manual page 50

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
To configure firmware section 1 as a boot up section:
DES-3526:4# config firmware section_id 1 boot_up
Command: config firmware section_id 1 boot_up
Success.
DES-3526:4#
show firmware information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current firmware information on the Switch:
DES-3526:4#show firmware information
Command: show firmware information
ID Version
-- --------
1 2.00-B19
*2 1.00-B21
'*' means boot up section
(T) means firmware update thru TELNET
(S) means firmware update thru SNMP
(W) means firmware update thru WEB
Free space: 3145728 bytes
DES-3526:4#
show config
Purpose
Syntax
Description
Used to display the firmware section information.
show firmware information
This command is used to display the firmware section information
None.
None
Size(B) Update Time
------- -------------------
1360471 00000 days 00:00:00
2052372 00000 days 00:00:56 10.53.13.94
Used to display the current or saved version of the configuration settings of the
switch.
show config [current_config | config_in_nvram]
Use this command to display all the configuration settings that are saved to NV
RAM or display the configuration settings as they are currently configured. Use the
keyboard to list settings one line at a time (Enter), one page at a time (Space) or
view all (a).
The configuration settings are listed by category in the following order:
From
------------------
Serial Port (PROM)
47
User
---------------
Unknown
Anonymous