Instructions For Lanconfig - Lancom 1723 VOIP User Manual

LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 3: Basic configuration

3.2

Instructions for LANconfig


54
In the basic settings, charge protection is set to a maximum value of
600 minutes in any seven day period. Please adjust this parameter to
match your own requirements, or deactivate charge protection if you
have agreed a tariff for unlimited traffic with your provider.
Start LANconfig with Start
LANconfig automatically detects new LANCOM devices in the TCP/IP net-
work.
If the search detects an unconfigured device, the Setup Wizard launches
to help you with its basic settings, or indeed to handle the entire process
on your behalf (assuming that the appropriate networking environment
exists).
If you cannot access an unconfigured LANCOM VoIP Router, the prob-
lem may be the LAN netmask: In case there are less than 254 potential
hosts available (netmask >'255.255.255.0'), you must ensure that the
IP address 'x.x.x.254' is available in your subnet.
If you choose automatic TCP/IP configuration, you can continue with step
.
Give the LANCOM an address from the applicable IP address range. Con-
firm with Next.
In the window that follows, you first set the password to the configura-
tion. Entries are case sensitive and should be at least 6 characters long.
You also define whether the device can be configured from the local net-
work only, or if remote configuration via WAN (i.e.. from a remote net-
work) is to be permitted.
Programs LANCOM LANconfig.