Client Mode; Client Settings - Lancom 1723 VOIP User Manual

LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 8: Advanced wireless LAN configuration
8.3

Client mode

To connect individual devices with an Ethernet interface into a wireless LAN,
LANCOM devices with a WLAN module can be switched to "client mode",
whereupon they act as conventional wireless LAN adapters and not as access
points (AP). The use of client mode therefore allows devices fitted with only
an Ethernet interface, such as PCs and printers, to be integrated into a wire-
less LAN.
SERVER

8.3.1

Client settings

For LANCOM Access Points and LANCOM Wireless Routers in client mode, fur-
ther settings/client behavior can be configured from the 'Client mode' tab
under the settings for the physical interfaces.

96
LAN
ACCESS POINT
WLAN device
in AP mode
Multiple WLAN clients can register with a WLAN device in AP mode,
which is not the case for a WLAN device in client mode.
The configuration of the client settings can also be carried out with
the WLAN Wizards in LANconfig.
PRINTER
WLAN device
in client mode
ACCESS POINT
ACCESS POINT
LAPTOP/W-LAN
WLAN device
in client mode
PC