Advertisement
Quick Links
4
Please observe the fol-
lowing when setting up
the device
1 For devices to be
operated on the desktop,
please attach the
adhesive rubber footpads
1 Do not rest any objects
. . . c o n n e c t i n g
y o u r
b u s i n e s s
on top of the device
LANCOM 1780EW-3G
1 Keep the ventilation slots
on the side of the device
clear of obstruction
Hardware Quick Reference
1 In case of wall mounting,
Use the drilling template
as supplied
1 Rack installation with the
optional LANCOM Rack
Mount (not supplied)
a
c
b
d
e
LANCOM 1681V
a
b
c
d
Optional:
power
Optional:
Optional:
3g antennas or
Wireless LAN antennas
serial configuration
gps antenna
When connecting the
Screw the two supplied
cable
Screw the two supplied
cable to the device, turn
WLAN antennas onto
Connect the device to a
cellular antennas onto the
the bayonet connector
the connectors WLAN1
PC with a configuration
connectors 3G Aux and
90° clockwise until it
and WLAN2. Depending
cable
3G Main.
clicks into place.
on how the antennas
(available as accessory).
Alternatively screw
are to be used, 'Antenna
the free available GPS
Grouping' may need to
antenna onto the connec-
be configured in order to
tors 3G Aux (see included
provide the desired MIMO
voucher).
Use only the supplied
behavior.
power adapter.
5
5
When working with separately purchased antennas, please ensure you
do not exceed the maximum permissible transmission power. The system
operator is responsible for adhering to the threshold values.
Antennas are only to be attached or changed when the device is switched off.
Mounting or demounting antennas with the device switched on may cause the
destruction of the 3G or WLAN modules!
f
g
power
No
Constant green
Blinking green
e
f
g
Wireless LAN
Optional:
Optional:
Optional:
No
WAN
LAN
siM card
Use a cable with
Use a cable with
Slide the SIM card into the slot using the
Green
the green-colored
the kiwi-colored
marker to ensure that the card is the right
connectors to con-
connectors to con-
way round.
nect the interfaces
nect the interfaces
Ensure that the SIM card clicks into place
green inverse
ETH2 to your WAN
ETH1 to your PC or
on insertion. To remove the card from the
flashing
modem.
a LAN switch.
device again, press the card lightly into
the device. Let go to release the SIM card
from the slot.
Blinking green
5
The SIM card is only to be
inserted or removed when the
device is switched off. Inserting
or removing the SIM card with the device
switched on may cause the destruction of
the 3G module!
Hardware
Power supply
Power consumption
Environment
Housing
Number of fans
interfaces
WAN
LAN
External antenna con-
nectors
External antenna con-
nectors
Serial interface
etH 1 and etH 2
WLAN protocols
Device switched off
No
No networking device attached
Ethernet
Device operational
Constant green
Connection to network device
operational, no data traffic
uMts modem
Configuration password not set.
Without a configuration password,
Flickering green
Data traffic
Supported standards: UMTS, HSPA+ (HSDPA with up to 21 Mbps, HSUPA with up to 5.76 Mbps), EDGE and GPRS
the configuration data in the device is
unprotected.
UMTS HSxPA bands
EDGE GPRS bands
declaration of conformity
CE
2.4 GHz WLAN
VpN
5 GHz WLAN
No WLAN network defined or WLAN
No
VPN connection inactive
Notifications
module deactivated. The WLAN module is
Blinking green
Establishing VPN connections
not transmitting beacons.
green constantly on VPN connection active
package content
At least one WLAN network is defined
and WLAN module activated. The WLAN
Manual
module is transmitting beacons.
Number of flashes = number of connected
CD/DVD
3g
WLAN stations and P2P wireless connec-
tions, followed by a pause (default).
No
UMTS interface switched off
Cable
Alternatively the frequency of the flashing
Blinking red/green
SIM card error
Antennas
can indicate signal strength over the
Blinking orange
Logging on to cellular network
Antennas
defined P2P link or the signal strength
between the access point and the device
orange constantly on
Logon to cellular network successful
Power adapter
operating in client mode.
green constantly on or
Cellular connection active; faster blinking
DFS scanning or other scan procedure.
blinking
indicates faster connection
License information for the device firmware (LCOS) is available in the file LCOS-Licenses.txt on the data medium
supplied.
12 V DC, external power supply unit (230 V) with bayonet connector to prevent unplugging
Max. ca.13.5 W
Temperature range 5 – 40 °C; humidity 0 – 95%; non-condensing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
None; fanless design, no rotating parts, high MTBF
10/100Base-TX, autosensing, auto node hub
10/100/1000 Base-TX, autosensing, auto node hub
Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for anten-
nas from other vendors. Please respect the restrictions which apply in your country when
setting up an antenna system. For information about calculating the correct antenna setup,
please refer to www.lancom.eu.
Two SMA antenna connectors for external UMTS antennas (RX diversity) or for operating a GPS
antenna at the AUX connector
Serial configuration interface / COM port (8-pin Mini-DIN):
9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM-port server and provides transparent asynchronous serial-data transfer via TCP
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP),
RIP-1, RIP-2, VLAN, IP
support
850/900/1900/2100 MHz
850/900/1800/1900 MHz (EDGE to max. 236 Kbps)
EN 55022, EN 55024, EN 60950
ETS 300 328
EN 301 893 Version 1.5.1, EN 302 502 (BFWA)
Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Spain, Switzer-
land, UK, Italy, Portugal, Czech Republic, Denmark, Malta, France
Hardware Quick Reference (DE/EN)
Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD with firmware, management software (LANconfig, LANmonitor, LANCAPI) and docu-
mentation
2 Ethernet cable, 3m (LAN: kiwi-colored connector; WAN: green connector)
Two 3dBi dipole dualband antennas
Two 2-dBi dipole UMTS/GPRS antennas (850-960 Mhz and 1700-2220 Mhz)
External power supply adapter (230V), NEST 12 V/1.5 A DC/S, barrel connector 2.1/5.5 mm
bayonet, LANCOM item no. 110723
Advertisement
