Lancom 1723 VOIP User Manual page 57

LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 3: Basic configuration
the second operating mode, the device can retrieve an IP address for itself
from a DHCP server in the LAN.

Network without a DHCP server
In a network without a DHCP server, unconfigured LANCOM devices enable
Not for centrally
managed LANCOM
their own DHCP server service when switched on and assign IP addresses,
Wireless Routers or
information on gateways, etc. to other computers in the LAN (provided they
LANCOM Access
are set to automatic retrieval of IP addresses – auto DHCP). In this constella-
Points
tion, the device can be accessed by every computer with the auto DHCP func-
tion enabled with a Web browser under IP address 172.23.56.254.

If the configuration computer does not retrieve its IP address from the
LANCOM DHCP server, it determines the current IP address of the computer
(with Start
56
If a LANCOM Wireless Router or LANCOM Access Point is centrally
managed from a LANCOM WLAN Controller, the DHCP mode is
switched from auto-mode to client mode upon provision of the WLAN
configuration.
With the factory settings and an activated DHCP server, the device for-
wards all incoming DNS requests to the internal Web server. This
means that a connection can easily be made to set set up an uncon-
figured LANCOM by entering any name into a Web browser.
Run cmd and command ipconfig at the prompt under Win-