Set The Ssid Of The Available Networks; Encryption Settings - Lancom 1723 VOIP User Manual

LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
To edit the settings for client mode in LANconfig, go to the 'Client mode'
tab under the physical WLAN settings for the desired WLAN interface.
In 'Scan bands', define whether the client station scans just the 2.4 GHz,
just the 5 GHz, or all of the available bands to locate an access point.
8.3.2

Set the SSID of the available networks

In the WLAN clients, the SSIDs of the networks to which the client stations are
to connect must be entered.
To enter the SSIDs, change to the 'General' tab under LANconfig in the
'Wireless LAN' configuration area. In the 'Interfaces' section, select the
first WLAN interface from the list of logical WLAN settings.
Enable the WLAN network and enter the SSID of the network the client
station should log onto.
8.3.3

Encryption settings

For access to a WLAN, the appropriate encryption methods and key must be
set in the client station.
Chapter 8: Advanced wireless LAN configuration
97