Mounting; Tabletop Placement; Rack Mounting; Furniture Mounting - Extron electronics FOX T USB User Manual

Extender plus fiber optic extenders for usb peripherals
Table of Contents

Advertisement

Mounting

The 6 inches (15 cm) deep, 1 inch (2.5 cm) high, quarter-rack wide FOX T/R USB Extender
Plus transmitter and receiver can be placed on a tabletop, mounted on a rack shelf, or
mounted under a desk or tabletop. See the instructions in the individual mounting kits for
installation instructions.

Tabletop Placement

Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.

Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of
these products in a rack:
1.
2.
3.
4.
5.
To find an appropriate rack mounting kit for your installation, go to the product page at
www.extron.com. To mount the FOX T/R USB Extender Plus, follow the instructions
provided with the accessories.

Furniture Mounting

To mount the USB Extender Plus to a desk, podium, or other furniture, follow the
instructions provided with the mounting kit. The unit can be mounted as follows:
Elevated operating ambient temperature — If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in
an environment compatible with the maximum ambient temperature (Tma: +122 °F,
+50 °C) specified by Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Consider the equipment nameplate ratings when addressing this concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (such as the use of power strips).
Under furniture — The unit can be mounted under a horizontal surface using an
optional Under-Desk Mount Kit for eighth-rack and quarter-rack width products (see
www.extron.com).
Through furniture — The transmitter or receiver can be mounted through a desk or
other furniture using an optional Extron Through-Desk Mounting Kit for quarter-rack or
half-rack width products (see www.extron.com). To mount the USB Extender Plus
follow the instructions provided with the mounting kit.
FOX T/R USB Extender Plus • Mounting
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fox r usb

Table of Contents