Danfoss VLT AutomationDrive FC 300 Instruction Manual page 56

4. How to Program
0-xx Operation and display parameters for basic adjustable frequency drive settings
1-xx Load and motor parameters, includes all load and motor-related parameters
2-xx Brake parameters
3-xx References and ramping parameters, includes DigiPot function
4-xx Limits warnings, setting of limits and warning parameters
4
5-xx Digital inputs and outputs, includes relay controls
6-xx Analog inputs and outputs
7-xx Controls, setting parameters for speed and process controls
8-xx Communication and option parameters, setting of FC RS485 and FC USB port parameters.
9-xx Profibus parameters
10-xx DeviceNet and CAN Serial Communication parameters
13-xx Smart Logic Control parameters
14-xx Special function parameters
15-xx Drive information parameters
16-xx Readout parameters
17-xx Encoder option parameters
32-xx MCO 305 Basic parameters
33-xx MCO 305 Advanced parameters
34-xx MCO Data Readout parameters
54
MG.33.A9.22 - VLT is a registered Danfoss trademark
®
VLT AutomationDrive FC 300 Instruction
Manual