BONFIGLIOLI active cube 201 Quick Start Manual page 27

This documentation describes the first steps for an easy commissioning of the frequency inverters ACTIVE Cube
series.
The labels on the housing and behind the upper cover helps to identify the devices of the ACTIVE Cube series.
Warning!
• The safety instructions and information on use contained in this documentation and in the oper-
ating instructions manual on the attached CD must be complied with strictly during installation
and commissioning of the frequency inverter.
• According to the application and optional components refer to additional manuals on CD.
• Non-compliance with the precaution described will result in death, serious injury or material
damage.
• The present documentation is applicative for qualified staff who is familiar with the installation,
assembly, commissioning and operation of the frequency inverter and has the proper qualifica-
tion for the job.
Persons who are not familiar with the operation of the frequency inverter and children may not
•
have access to the device.
Commissioning and start of operation is not allowed until it has been verified that the machine
•
meets the requirements of the EC Machinery Directive 98/37/EEC and EN 60204.
• When working at the frequency inverter, comply with the applicable standards BGV A2 (VBG 4),
VDE 0100, standards for equipment of heavy current installations such as EN 50178 and other
national directives.
• Before commissioning and the start of the operation fix all covers and check the terminals.
Check the additional monitoring and protective devices according to EN 60204 and applicable
the safety directives (e.g. Working Machines Act, Accident Prevention Directives etc.). No con-
nection work may be performed, while the system is in operation.
Note:
Further information on frequency inverter application, storage, maintenance and service is stored on the attached
CD.
09/08
09/08
(The position of
the label is de-
pendent on the
construction
size.)
25
25