Segment Connection; Profiler Modes - Brainchild P41 User Manual

4-2 Segment connection

4-2 Segment connection
Four kinds of combination are allowable for connectiong segments,
these are:
Ramp-Ramp:
Ramp-Dwell:
Dwell-Ramp:
Dwell-Dwell:

4-3 Profiler Modes

4-3 Profiler Modes
The profile have eight operating modes:
Mode
In run mode, the profiler varies the set point
Run
according to the stored profile values.
In hold mode, the profile is forzen at its
current point. In this state you can make
temporary changes to any profile
parameter( for example, a target set point,
a dwell time or the time remaining in the
Hold
current segment ). Such changes will only
remain effective until the profile is reset and
run again, when they will be overwritten by
the stored profile values.
66
Description
UM0P411A
Indication
RUN light on
HLD light on