Keys And Displays - Brainchild P41 User Manual

1- 4 Keys and Displays

1- 4 Keys and Displays
KEYPAD OPERATION KEYPAD OPERATION
SCROLL KEY : SCROLL KEY :
This key is used to select a parameter to be viewed or adjusted.
UP KEY : UP KEY :
This key is used to increase the value of selected parameter.
DOWN KEY : DOWN KEY :
This key is used to decrease the value of selected parameter.
PAGE KEY: PAGE KEY:
This key is used to select desired page of parameters.
REVERSE SCROLL : REVERSE SCROLL :
Press both
RESET KEY : RESET KEY :
Press both
1. Revert the display to display the process value.
2. Reset the latching alarm, once the alarm condition is
removed.
3. Stop the manual control mode , auto-tuning mode and off
mode, then enters the static mode.
4. Clear the message of communication error, holdback time
out error and auto-tuning error.
5. To reset new profile start segment to 1.00 after earlier profile is
completed when " RUN" and "HLD" LED's are blinking together.
ENTER KEY : Press ENTER KEY :
1. Enter the selected mode to run.
2. Execute calibration procedure for the low point and high point
calibration.
12
and keys to jump to the previous parameter.
and keys to :
for 5 seconds to :
UM0P411B