Table 3.3 Alarm Mode Description - Brainchild P41 User Manual

The alarm modes (A1MD, A2MD and A3MD) are set by using a three bit
of binary number.
alarm
mode
value
A direct acting
condition and on as an alarm condition. The output state is
inverted as a reverse alarm output is selected for OUT2, OUT3
or OUT4.
A direct acting
condition and it will remain unchanged even if the alarm
condition is cleared. The output state is inverted as a reverse
alarm output is selected for OUT2, OUT3 or OUT4.
A direct acting
condition may occur on power up. This will prevail until the
alarm condition returns to the "inactive" condition, thereafter the
alarm will operate normally.
reverse alarm output is selected for OUT2, OUT3 or OUT4.
A direct acting
holding and latching alarm functions.
inverted as a reverse alarm output is selected for OUT2, OUT3
or OUT4.

Table 3.3 Alarm mode description

Table 3.3 Alarm mode description
The latching alarm output is off when both
once the alarm condition is removed.
54
Description
normal alarm output is off as the non-alarm
latching alarm output is on as an alarm
holding holding alarm output is off even if an alarm
The output state is inverted as a
latching latching and holding holding
UM0P411A
alarm performs both
The output state is
and keys are pressed,