Displayed
value
Desired high
point value
High point
calibration
Low point
calibration
Desired low
point value
The two points construct a straight line. For the reason of accuracy it is
best to calibrate with the two points as far as possible.
After user calibration is complete, the input type will be stored in the
memory. If the input type is changed, a calibration error will occur and
an error code
56
Offset
introduced
Figure 3.9 Two point user calibration
Figure 3.9 Two point user calibration
is displayed.
UM0P411A
User
Calibration
Factory
Calibration
Offset
introduced
Input signal