Exhaust Relief Muffler Assembly - Evinrude E-TEC 200 Service Manual

MIDSECTION

EXHAUST RELIEF MUFFLER ASSEMBLY

EXHAUST RELIEF
MUFFLER ASSEMBLY
The exhaust relief muffler is located at the rear of
the adaptor housing and concealed by the lower
motor covers. The exhaust relief grommet con-
nects directly to the muffler assembly.
1. Exhaust relief grommet
The muffler assembly connects to the exhaust
relief hoses from the adaptor housing assembly.
1
2
1. Exhaust relief grommet
2. Exhaust relief hoses
278
The overboard indicator and flush port in the
exhaust relief grommet connect to the adaptor
housing assembly with a hose. This hose is not
connected to the muffler assembly.
1
1. Overboard indicator and flush port
Periodically inspect hoses and connections for
condition. Replace muffler or hoses as needed.
004122
004226
1
004225