Exhaust Housing Disassembly - 3.4 L Models - Evinrude E-TEC 200 Service Manual

Mark the water tube for correct reassembly loca-
tion. Remove six inner exhaust housing screws.
Remove the inner exhaust housing.
Remove the water tube and grommet from the
inner exhaust housing. Discard the grommet.
Loosen retaining screws and remove the cover
from water plate.
Loosen retaining screws and remove water plate
from the adapter.
2
1. Cover
2. Water plate
EXHAUST HOUSING SERVICE
Exhaust Housing Disassembly –
3.4 L models
Remove two front adapter to outer exhaust hous-
ing screws.
13638
Remove three nuts at rear of the adapter.
.
1
13641
MIDSECTION
006980
006978
12
267