Show Fast-Hiper-Ring (Mach 1000, Rsr20/Rsr30) - Hirschmann RS20 Reference Manual

CLI Commands: Switching
5.4.1 show fast-hiper-ring (MACH 1000, RSR20/
RSR30)
This command displays the settings and states of the HIPER-Ring. The fol-
lowing details are displayed on execution of the command.
Format
show fast-hiper-ring
Mode
Privileged EXEC and User EXEC
Ring ID
Display the Ring ID.
Mode of Switch (administrative setting)
Display the HIPER-Ring mode administrative settings.
Mode of Switch (real operating state)
Display the HIPER-Ring operation mode.
Ring Name
Display theFast-HIPER-Ring's name.
Number of nodes in the ring
Display the number of nodes in the ring.
Port Number, Primary
Display the HIPER-Ring's primary port number and its properties.
Port Number, Secondary
Display the HIPER-Ring's secondary port number and its properties.
Operation
Display the admin state of the HIPER-Ring configuration.
General Operating States
Display general information concerning the fast-hiper-ring state.
448
5.4 Fast-HIPER-Ring
CLI L2P
Release 7.0 05/2011