Example Of Hiper-Ring - Hirschmann RS20 User Manual

Ring Redundancy

2.1 Example of HIPER-Ring

A network contains a backbone in a line structure with 3 devices. To increase
the redundancy reliability of the backbone, you have decided to convert the
line structure to a HIPER-Ring. You use ports 1 and 2 in module 1 of the
devices to connect the lines.
1
1.1 1.2
RM
Figure 3: Example of HIPER-Ring
RM = Ring Manager
—— main line
- - - redundant line
The following example configuration describes the configuration of the ring
manager device (1). The two other devices (2 to 3) are configured in the
same way, but without activating the ring manager function. Select the
"Standard" value for the ring recovery, or leave the field empty.
Note: You cannot configure devices with L2B software as ring managers.
You can exlusively use these devices as members of the redundant ring.
Redundanz L2B
Release 5.0 04/09
2
1.1 1.2 1.1
2.1 Example of HIPER-Ring
3
1.2
13