Hirschmann RS20 Reference Manual page 294

U
copy aca:capturefilter <sourcefilename>
nvram:capturefilter <targetfilename>
Load a capture filter file from AutoConfiguration Adapter ACA21 into
the flash memory.
– sourcefilename: Filename of source capture filter expressions
file.
– targetfilename: Specify the file name on the switch's NVRAM.
U
copy <url> nvram:script <destfilename>
Downloads Configuration Script file using <tftp://ip/filepath/fileName>.
– destfilename: Filename length may be max. 20 characters,
including extension '.cli' or '.CLI'.
U
copy <url> nvram:startup-config
Downloads Config file by tftp using <tftp://ip/filepath/fileName>.
U
copy <url> system:image
Downloads code file by tftp using <tftp://ip/filepath/fileName>.
U
copy <url> system:running-config
Downloads Code/Config file using <tftp://ip/filepath/fileName>.
The target is the currently running configuration.
U
copy <url> system:bootcode
Downloads bootcode file by tftp using <tftp://ip/filepath/fileName>.
294
4.11 System Utilities
CLI L2P
Release 7.0 05/2011