Hirschmann RS20 Reference Manual page 451

CLI Commands: Switching
mode ring-switch
Switch is ring-switch for the given Fast HIPER-Ring ID.
mode rm
Abbreviation for 'ring-manager'.
mode rs
Abbreviation for 'ring-switch'.
operation
Enable or disable the switch for the given Fast-HIPER-Ring ID.
port
Specify the switch's ports for the given Fast-HIPER-Ring ID.
ring-name
Set a ring name for the given Fast HIPER-Ring ID.
nodes
Specify the number of nodes in the ring for the given Fast HIPER-
Ring ID.
vlan
Specify the VLAN for the given Fast HIPER-Ring ID.
delete-id
Delete the given Fast HIPER-Ring ID.
new-id
Create a new Fast HIPER-Ring ID. The configuration will consist of
default parameters and its operation will be disabled.
<id>
Enter a new Fast HIPER-Ring ID. Format: a number in the range 1-
2147483647 (2^31 - 1). An ID of 0 is invalid.
default-id
Create a default Fast HIPER-Ring ID (1).
CLI L2P
Release 7.0 05/2011
5.4 Fast-HIPER-Ring
451