Hirschmann RS20 Reference Manual page 525

CLI Commands: Security
supplicant. The value is expressed in seconds and will be in the
range 0 and 65535.
Transmit Period
The timer used by the authenticator state machine on the specified
port to determine when to send an EAPOL EAP Request/Identity
frame to the supplicant. The value is expressed in seconds and will
be in the range of 1 and 65535.
Guest VLAN ID
Display the Guest VLAN ID. Default value: 0.
Guest VLAN Period (secs)
Display the Guest VLAN Period. Default value: 90 seconds.
Supplicant Timeout
The timer used by the authenticator state machine on this port to
timeout the supplicant. . The value is expressed in seconds and will
be in the range of 1 and 65535.
Server Timeout
The timer used by the authenticator on this port to timeout the
authentication server. The value is expressed in seconds and will be
in the range of 1 and 65535.
Maximum Requests
The maximum number of times the authenticator state machine on
this port will retransmit an EAPOL EAP Request/Identity before timing
out the supplicant. The value will be in the range of 1 and 10.
VLAN Id
Display the VLAN Id.
VLAN Assigned Reason
Display the state of the VLAN Assigned Reason parameter.
Possible values: RADIUS, Not Assigned, ....
Reauthentication Period
The timer used by the authenticator state machine on this port to
determine when reauthentication of the supplicant takes place. The
value is expressed in seconds and will be in the range of 1 and
65535.
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
525