Hirschmann RS20 Reference Manual page 478

CLI Commands: Switching
dhcp-server pool modify <id> mode remoteid none
Use none to remove the mode.
dhcp-server pool modify <id> mode remoteid <remoteid>
Enter remoteid in xx:xx:...:xx format.
dhcp-server pool modify <id> mode circuitid none
Use none to remove the mode.
dhcp-server pool modify <id> mode circuitid <circuitid>
Enter circuitid in xx:xx:...:xx format.
1)
Available for pools with single IP address only.
478
5.8 DHCP Server Commands
1)
1)
1)
1)
Release 7.0 05/2011
CLI L2P