Hirschmann RS20 Reference Manual page 524

CLI Commands: Security
Operating Control Mode
The control mode under which this port is operating. Possible values
are authorized
Reauthentication Enabled
Indicates whether re-authentication is enabled on this port
Key Transmission Enabled
Indicates if the key is transmitted to the supplicant for the specified
port
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x
configuration for the specified port are displayed.
Port
The interface whose configuration is displayed
Protocol Version
The protocol version associated with this port. The only possible
value is 1, corresponding to the first version of the dot1x specification.
PAE Capabilities
The port access entity (PAE) functionality of this port. Possible
values are Authenticator or Supplicant.
Control Mode
Display the state of the Control Mode. Possible values: auto,
forceauthorized, ....
Authenticator PAE State
Current state of the authenticator PAE state machine. Possible
values are Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, ForceAuthorized, and
ForceUnauthorized.
Backend Authentication State
Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and
Initialize.
Quiet Period
The timer used by the authenticator state machine on this port to
define periods of time in which it will not attempt to acquire a
524
| unauthorized
6.1 Security Commands
Release 7.0 05/2011
CLI L2P