Command Structure
The commands with strings that may contain these special characters are
listed below.
Note: Not every string is allowed to contain special characters. The string
that is output with the escape characters (if necessary) is shown as "...".
Command
!System Description "..."
!System Version "..."
Tab. 4: Commands in Privileged Exec mode
Command
snmp-server location "..."
snmp-server contact "..."
snmp-server community "..."
snmp-server community ipaddr <ip> "..."
snmp-server community ipmask <ip> "..."
snmp-server community ro "..."
snmp-server community rw "..."
no snmp-server community mode "..."
no snmp-server community "..."
link-aggregation "..."
spanning-tree configuration name "..."
ptp subdomain-name "..."
Tab. 5: Commands in Global Config mode
Command
Note
name "..."
Tab. 6: Commands in Interface Config mode
CLI L2P
Release 7.0 05/2011
Note
"At the beginning of the script
"At the beginning of the script
Note
1.1 Format
29