Storm-Control Egress-Limiting - Hirschmann RS20 Reference Manual

4.9.84 storm-control egress-limiting

This command enables or disables the egress limiter globally for all frame
types.
Format
storm-control egress-limiting {disable | enable}
Mode
Global Config
4.9.85 storm-control ingress-limiting
This command enables or disables the ingress limiter globally.
Format
storm-control ingress-limiting {disable | enable}
Mode
Global Config
4.9.86 storm-control ingress-mode
This command sets the frame type for the ingress limiter globally to:
BC or BC+MC (MACH 4000 and PowerMICE only).
Format
storm-control ingress-mode {bc | mc+bc}
Mode
Global Config
244
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011