Hirschmann RS20 Reference Manual page 293

System Name:
Mgmt-IP
1.Router-IP:
Base-MAC
System Time:
---------------------------------------------------
The command uploads the CLI Banner file by tftp using
<tftp://ip/filepath/fileName>.
After the upload you logout from CLI and the new CLI banner file will
be displayed at the next login.
– url: Upload CLI banner file using <tftp://ip/filepath/fileName>.
If no cli banner file is defined, the default cli banner is displayed (see
above).
Note: See that the the CLI banner file you created has the following
properties:
- Use ASCII format (character codes 0x20 .. 0x7F, \n and \t
as C-like sequences)
- Do not use regular expressions
- Do not exeed the limit of 2048 byte
- Do not exceed the limit of 20 lines
- Do not exceed the limit of 80 characters per line
- A device can only have one banner file at the moment
- Save the CLI banner file as *.bnr.
U
no clibanner
This command deletes an existing CLI banner file.
U
copy <url> nvram:capturefilter <destfilename>
Load a Capture Filter file from a tftp URL into the flash memory using
<tftp://ip/filepath/fileName>.
– destfilename: Destination filename of capture filter expressions
file.
CLI L2P
Release 7.0 05/2011
<Product Name>-518280
: a.b.c.d
0.0.0.0
: aa:bb:cc:dd:ee:ff
2010-01-02 05:51:11
4.11 System Utilities
293