Hirschmann RS20 Reference Manual page 455

CLI Commands: Switching
partner IP
Display the switch's Ring Coupling partner IP address (only valid for
remote configurations).
port
Display the switch's Ring Coupling ports
– all
– local
– partner (only takes effect in dual configurations)
– control (only takes effect in outband configurations).
redundancy-mode
Display the Ring Coupling's redundancy mode
– normal
– extended.
Ring/Network Coupling Mode
Display the Ring/Network Coupling mode
– ring-only if you wish to couple a HIPER-Ring.
– network if you wish to couple a line-type configuration.
CLI L2P
Release 7.0 05/2011
5.5 Redundant Coupling
455