Repositioning The Joystick - Pronto M61 Owner's Operator And Maintenance Manual

Standard
Arm
DETAIL "A" - TIE-WRAP
LOCATIONS
Office Style Seat
Tie-Wrap Here

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 12.2.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick
assembly.
1. Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex mounting screws, spacers and locknuts that secure the
mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4. Reposition the mounting bracket on the opposite arm frame.
5. Using the three hex mounting screws, spacers and locknuts secure the mounting
bracket to the three mounting holes of the arm frame.
Part No. 1139640
Office Style Seat
Mounting Bracket and
Adjustment Lock Lever
Standard
Joystick Cable
FIGURE 12.1 Removing/Installing the Joystick
SECTION 12—ELECTRONICS
Joystick
Mounting
Arm
Tie-Wrap Here
73
Joystick
Tube
Mounting
Screws
Joystick
Pronto® M61™with SureStep®