Removing; Repositioning The Joystick - Pronto M50 Owner's Operator And Maintenance Manual

4. Install the joystick. Refer to Removing/Installing the Joystick on page 75.
5. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 78.

Removing

1. Disconnect the joystick. Refer to
Disconnecting/Connecting the Joystick
on page 78.
2. Remove the joystick. Refer to
Removing/Installing the Joystick on
page 75.
3. Remove the two (2) armpad mounting
screws that secure the armpad to the
arm. Refer to FIGURE 12.3.
4. Remove the two (2) bracket mounting
screws that secure the mounting
bracket to the arm. Refer to
FIGURE 12.3.

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 12.3.
1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 78.
2. Remove the joystick. Refer to Removing/Installing the Joystick on page 75.
3. Remove the joystick mounting bracket. Refer to Installing/Removing the Joystick
Mounting Bracket (Office Style Seat Only) on page 76.
4. Reinstall armpad to the arm using the two (2) armpad mounting screws.
5. Remove the two (2) armpad mounting screws that secure the armpad to other arm.
6. Install the mounting bracket on the other arm using the two (2) bracket mounting
screws.
7. Reinstall the armpad to the arm using the two (2) armpad mounting screws.
8. Install the joystick. Refer to Removing/Installing the Joystick on page 75.
9. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 78.
Part No. 1125085
SECTION 12—ELECTRONICS
Armpad
Bracket
Mounting
Screws
Armpad
Mounting
Screw
Arm
FIGURE 12.3 Installing/Removing the
Joystick Mounting Bracket (Office Style Seat
77 ® ™
Pronto M50 , M51
Armpad
Mounting
Screw
Joystick
Mounting
Bracket
Only)
™ ™
and M61 with SureStep
™