Depth - Pronto M61 Owner's Operator And Maintenance Manual

SECTION 8—FOOTBOARD ASSEMBLY

Depth

NOTE: For this procedure, refer to FIGURE 8.3.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair
frame.
Make sure the detent balls of the quick-release pin are fully released and beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean.
2. Adjust footboard to one of three mounting positions.
3. Install the quick release pin. Make sure the detent balls of the quick-release pin are
fully released and beyond the outer edge of the tube (Detail "A").
Mounting
Hole
Quick
Release Pin
FIGURE 8.3
Pronto® M61™with SureStep®
WARNING
Top Shroud
Three Depth
Adjustment Holes
Footboard
Assembly
Detent
Ball
Adjusting the Footboard Assembly - Depth
DETAIL "A" - BOTTOM VIEW OF
FOOTBOARD
Outer Edge
of Tube
50
Quick Release Pin
Detent Balls
Part No. 1139640