Inspect/Adjust Weekly; Inspect/Adjust Monthly; Inspect/Adjust Periodically - Pronto M61 Owner's Operator And Maintenance Manual

Check that all labels are present and legible. Replace if necessary.

Inspect/Adjust Weekly

Seat is secured to wheelchair frame.
Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
Seat release latch is not worn and is functional. Replace if necessary.
Inspect tires for flat spots and wear.
Check pneumatic tires for proper inflation.
Ensure arm pivot points are not worn and/or loose. Replace if necessary.

Inspect/Adjust Monthly

Ensure wheel mounting nuts are secure on drive wheels.
Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (freewheeling).
Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
Ensure all caster/wheel/fork/headtube fasteners are secure.
Inspect for any loose hardware on the wheelchair.
Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
Make sure elevate operates smoothly and properly.
Make sure elevate systems drive with reduced speed when seat is in elevated position.

Inspect/Adjust Periodically

Ensure wheelchair rolls straight (no excessive drag or pull to one side).
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Ensure arms are secure but easy to release and adjustment levers engage properly.
Ensure adjustable height arms operate and lock securely.
Ensure arm pivot points are not worn and/or loose. Replace if necessary.
Ensure armrest pads sit flush against arm.
Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
Ensure seat release latch is not worn. Replace if necessary.
Part No. 1139640
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
25
Pronto® M61™with SureStep®