Adjusting Height; Adjusting Depth - Pronto M61 Owner's Operator And Maintenance Manual

SECTION 6—ARMS
6. Repeat STEPS 1-5 for opposite armrest, if necessary.

Adjusting Height

NOTE: For this procedure, refer to FIGURE 6.4.
1. Remove the adjustment knob that secures the arm pad to the arm tube.
2. Adjust the arm pad to one of five positions.
3. Reinstall the adjustment knob that secures the arm pad to the arm tube and tighten
securely.

Adjusting Depth

NOTE: For this procedure, refer to FIGURE 6.5.
1. Remove the mounting screw and locknut that secure the arm adjusting bar to the arm
pad.
2. Install the arm adjusting bar to the other depth adjustment hole on the arm pad with
the mounting screw and locknut. Securely tighten.
Locknut
(not
shown)
Pronto® M61™with SureStep®
Height
Adjustment
Holes
Adjustment
Knob
FIGURE 6.4 Adjusting Height
Arm Adjusting Bar
FIGURE 6.5 Adjusting Depth
38
Arm Pad
Arm Tube
Arm Pad
Depth
Adjustment
Hole
Mounting Screw
Part No. 1139640