1. Manuals
  2. Brands
  3. Pronto Manuals
  4. Wheelchair
  5. M61
  6. Owner's operator and maintenance manual

Pronto M61 Owner's Operator And Maintenance Manual

With surestep
Hide thumbs Also See for M61:
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Operator and Maintenance Manual
Pronto
M61
with
®
™
SureStep
®
DEALER: This manual MUST be given to
the user of the wheelchair.
USER: BEFORE using this wheelchair, read
this manual and save for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M61 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pronto M61

Summary of Contents for Pronto M61

  • Page 1 Owner’s Operator and Maintenance Manual Pronto with ® ™ SureStep ® DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference.

  • Page 2: Reference Documents

    WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO SERVICE OR OPERATE THIS EQUIPMENT. OTHERWISE, INJURY OR DAMAGE MAY RESULT. REFERENCE DOCUMENTS Contact Invacare for the electronics manual and information regarding service parts for this wheelchair. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 3: Table Of Contents

    Using the Joystick to Drive the Wheelchair ..................29 Adjusting the Speed ..........................30 Using the Horn............................31 Elevating the Seat............................31 Joystick Switches and Indicators ......................32 On/Off Button ............................33 Speedometer............................33 Speed Control Buttons........................33 Mode Button ............................33 Joystick..............................33 Pronto® M61™with SureStep® Part No. 1139640...
  • Page 4 Setting Legrest End Stop ........................55 Adjusting Legrest Length........................56 Adjusting Calf Plate Depth.........................56 Adjusting Calf Plate Height ........................57 SECTION 10—TOP SHROUD AND WHEELS ........58 Replacing Pneumatic Tires........................58 Removing/Installing the Top Shroud ....................58 Removing ...............................58 Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 5 SECTION 12—ELECTRONICS ............72 Removing/Installing the Joystick ......................72 Removing ...............................72 Installing..............................72 Repositioning the Joystick........................73 Disconnecting/Connecting the Joystick....................74 Disconnecting ............................74 Connecting ............................74 SECTION 13—ACCESSORIES ............76 Installing/Removing the Crutch/Cane Holder..................76 Installing..............................76 LIMITED WARRANTY ..............79 Pronto® M61™with SureStep® Part No. 1139640...

  • Page 6: Special Notes

    The drive behavior initially experienced by the user may be different from other chairs previously used. This power wheelchair has Invacare’s SureStep technology, a feature that provides the chair with optimum traction and stability when driving forward over transitions and thresholds of up to 5 cm. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 7 The 'crossed out wheelie bin' symbol is placed on this product to encourage you to recycle wherever possible. Please be environmentally responsible and recycle this product through your recycling facility at its end of life. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 8: Label Location

    LABEL LOCATION LABEL LOCATION Pronto® M61™with SureStep® Part No. 1139640...

  • Page 9: Typical Product Parameters

    Users should become familiar with the battery discharge indicator on the joystick to determine the range of their wheelchair. Refer to Battery Charger Operation on page 70 for more information about the battery discharge indicator. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 10: Section 1-General Guidelines

    DO NOT shift your weight or sitting position toward the direction you are reaching as the wheelchair may tip over. DO NOT engage or disengage the motor release levers until the power is in the Off position. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 11: Cleaning And Disinfection

    Only use a damp cloth and gentle detergent to clean this wheelchair. Do not use any abrasive or scouring liquids. Do not subject the electronic components to any direct contact with water. Do not use high pressure cleaning devices. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 12: Accessories

    Doing so will reduce the life of the batteries. Read and carefully follow the manufacturer’s instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for proper procedures. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 13: Grounding Instructions

    Failure to follow these suggestions may cause the tire to explode and cause bodily harm. The recommended tire pressure is listed on the side wall of the tire. Replacement of a tire or tube must be performed by a qualified technician. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 14: Weight Training

    If occupant uses said wheelchair as a weight training apparatus, Invacare shall not be liable for bodily injury and the warranty is void. Weight Limitation M61 wheelchairs with SureStep have a weight limitation of 136 kg. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 15: Section 2-Emi Information

    AM/FM radios, TV sets, CD players, cassette players, and small appliances, such as elec- tric shavers and hair dryers, so far as we know, are not likely to cause EMI problems to your powered wheelchair. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 16 EMI (as of May 1994) (the higher the level, the greater the protection); 2) The immunity level of the product is unknown. Modification of any kind to the electronics of this wheelchair as manufactured by Invacare may adversely affect the RFI immunity levels. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 17: Section 3-Safety/Handling Of Wheelchairs

    While the walking beam allows to traverse up to a 5 cm bump or threshold, stopping after the wheels cross the bump poses a problem. The chair cannot reverse over the bump at this point. Continue forward and then turn around. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 18: A Note To Wheelchair Assistants

    Pinch points before lowering seat Point (FIGURE 3.2). DO NOT store or place items under the seat. NOTE: For this procedure, refer to FIGURE 3.2 and FIGURE 3.3. FIGURE 3.2 Pinch Points Pronto® M61™with SureStep® Part No. 1139640...

  • Page 19: Lifting/Stairways

    Follow this procedure for moving the wheelchair between floors when an elevator is not available or lifting the wheelchair is necessary: NOTE: When using a stairway to move the wheelchair, seat and any accessories, move all wheelchair components away from the stairway prior to reassembly. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 20 9. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40. Front Fork Rear (Front Edge) Frame FIGURE 3.4 Lifting/Stairways WARNING - ESCALATORS DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 21: Transferring To And From Other Seats

    3. Flip back or remove arm on side of wheelchair you are transferring from. 4. Shift body weight into seat with transfer. During independent transfer, little or no seat platform will be beneath you. Use a transfer board if at all possible. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 22: Percentage Of Weight Distribution

    DO NOT attempt to reach objects if you have to move forward in the seat or pick them up from the floor by reaching down between your knees. FIGURE 3.6 Reaching, Leaning and Bending - Forward Pronto® M61™with SureStep® Part No. 1139640...

  • Page 23: Reaching And Bending - Backward

    Position wheelchair as close as possible to the desired object. Point the front AND rear casters rearward to create the longest possible wheelbase. Reach back only as far as your arm will extend without changing your sitting position. FIGURE 3.7 Reaching and Bending - Backward Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 24: Section 4-Safety Inspection/Troubleshooting

    Inspect tires for flat spots and wear. Check pneumatic tires for proper inflation. Make sure elevate operates smoothly and properly. Make sure elevate systems drive with reduced speed when seat is in elevated position. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 25: Inspect/Adjust Weekly

    Ensure arm pivot points are not worn and/or loose. Replace if necessary. Ensure armrest pads sit flush against arm. Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary. Ensure seat release latch is not worn. Replace if necessary. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 26: Troubleshooting Guide

    One motor lock is disen- Engage motor lock. gaged. Joystick erratic or does not Electrical malfunction. Contact Dealer/Invacare for service. respond as desired. Controller programmed Reprogram controller (Refer to electronics man- improperly. ual supplied with wheelchair). Pronto® M61™with SureStep® Part No. 1139640...
  • Page 27 Wheelchair slows or stops Elevating seat is elevated. Return seat to its lowest position. Refer to Ele- while driving and the Seat vating the Seat on page 31. Function 1 indicator is lit. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 28: Section 5-Wheelchair Operation

    NOTE: If the joystick has been programmed for lock mode, holding the On/Off button down for four seconds will lock the joystick. The LEDs will flash briefly and the horn will sound a short beep. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 29: Using The Joystick To Drive The Wheelchair

    Move the joystick LEFT. STOP Release the joystick and the wheelchair will quickly slow down. To Move Forward Joystick To Move Right To Move Left To Move Backward FIGURE 5.2 Using the Joystick to Drive the Wheelchair Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 30: Adjusting The Speed

    ) to decrease/ increase the speed in smaller increments. The smaller bars in the speedometer will light. Smaller Bar in Speedometer Tortoise Button Hare Button Larger Bar in Speedometer FIGURE 5.3 Adjusting the Speed Pronto® M61™with SureStep® Part No. 1139640...

  • Page 31: Using The Horn

    2. Press the mode button to switch from driving mode to elevate mode. NOTE: The LED will light up with a circle around it. 3. Move the joystick: • Forward - Elevates the seat. • Backward - Lowers the seat. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 32: Joystick Switches And Indicators

    Joystick Information Gauge Display On/Off Mode Button Button Decrease Speedometer Speed Button (Tortoise) Increase DETAIL “A” - Speed Button FRONT VIEW (Hare) GREEN Charger/ Programming Input Service Indicator FIGURE 5.6 Joystick Switches and Indicators Pronto® M61™with SureStep® Part No. 1139640...

  • Page 33: On/Off Button

    (neutral) position, the faster the wheelchair or seat moves. Your top speed, however, is limited by the programmed settings. To slow the wheelchair to a stop, simply release the joystick. The wheelchair has automatic speed and direction compensation to minimize corrections. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 34: Charger/Programming Input

    The Information Gauge display also serves as a system diagnostic device when a fault is detected by the control module. A specific number of flashes of the LEDs indicate the type of fault detected. Refer to the table for the diagnostic indications of the wheelchair status. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 35 All LEDs are flashing slowly. Joystick has detected Out- Release the joystick back of-Neutral-at-Power-Up to Neutral. mode. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 36: Section 6-Arms

    1. Loosen lock knob that secures the arm to the arm support tube. 2. Remove the arm from the arm support tube. 3. If necessary, repeat STEPS 1-2 to remove the other arm. Seat Arm Pad Lock Arm Support Knob Tube FIGURE 6.1 Removing/Installing the Arms Pronto® M61™with SureStep® Part No. 1139640...

  • Page 37: Adjusting The Arms

    FIGURE 6.3 Adjusting Angle 4. Tighten the jam nut. 5. To determine the same angle for the opposite arm pad, count the exposed threads after the jam nut has been tightened. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 38: Adjusting Height

    2. Install the arm adjusting bar to the other depth adjustment hole on the arm pad with the mounting screw and locknut. Securely tighten. Arm Pad Depth Locknut Adjustment (not Hole shown) Mounting Screw Arm Adjusting Bar FIGURE 6.5 Adjusting Depth Pronto® M61™with SureStep® Part No. 1139640...

  • Page 39: Section 7-Seat

    1. To raise the headrest, lift the headrest up to the desired position. 2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower the headrest to the desired position. Headrest Release Tab Headrest Tube FIGURE 7.2 Adjusting the Headrest Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 40: Removing/Installing The Seat Assembly

    4. Pull the seat assembly up to ensure that it is locked in place. 5. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 74. Seat Assembly Seat Post Seat Lever FIGURE 7.3 Removing/Installing the Seat Assembly Pronto® M61™with SureStep® Part No. 1139640...

  • Page 41: Adjusting Seat Depth

    Maximum Seat Depth Seat Depth Seat Size 46 cm 40 X 46 cm 46 cm 46 X 46 cm 51 cm 51 X 51 cm 51 cm 56 X 51 cm FIGURE 7.4 Adjusting Seat Depth Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 42: Adjusting The Seat Height

    (if required). Securely tighten. 5. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40. CAUTION Spacers should be placed in orientation shown, otherwise they will interfere with the seat lever. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 43: Adjusting Seat Position On Seat Base

    4. Refer to FIGURE 7.6 to determine the correct mounting holes to achieve the desired seat position. 5. Align the mounting holes on the seat adapter plate (determined in STEP 4) with the mounting holes on the seat base. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 44 DETAIL “B” - PROPER SEAT POSITIONS FOR 46 CM DEEP BACK SETTING Y - Use N/A - DO NOT Use WEIGHT 3 CM STANDARD 3 CM LIMITATION BACK FORWARD 136 KG 100 KG 68 KG FIGURE 7.6 Adjusting Seat Position on Seat Base Pronto® M61™with SureStep® Part No. 1139640...

  • Page 45: Installing Seat Angle Bracket For 5° Tilt

    NOTE: Only one set of spacers (total of two spacers) can be installed when the seat angle bracket is installed. 7. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 46 NOTE: Seat assembly not shown for clarity. when the seat angle bracket is installed. DETAIL “C” Front of Seat Seat Angle Bracket Flange Flange Rear of Seat FIGURE 7.7 Installing Seat Angle Bracket for 5° Tilt Pronto® M61™with SureStep® Part No. 1139640...

  • Page 47: Replacing The Seat Positioning Strap

    4. Reinstall the two mounting screws that secure the seat positioning straps to the seat frame. Securely tighten. Seat Seat Positioning Seat Lever Strap Seat Positioning Strap Mounting Screws FIGURE 7.8 Replacing the Seat Positioning Strap Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 48: Section 8-Footboard Assembly

    Keep detent balls clean. 1. Position the footboard assembly onto the wheelchair frame so that the mounting hole in the wheelchair frame aligns with the desired mounting hole in the footboard assembly. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 49: Adjusting The Footboard Assembly

    3. Thread the jam nut and washer inward until it is flush with the footboard bracket. 4. Securely tighten the jam nut and washer to secure the mounting screw in place. Set Screw, Washer and Jam Nut Footboard Assembly FIGURE 8.2 Adjusting the Footboard Assembly - Angle Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 50: Depth

    DETAIL “A” - BOTTOM VIEW OF FOOTBOARD Top Shroud Quick Release Pin Three Depth Adjustment Holes Footboard Assembly Mounting Hole Detent Balls Outer Edge of Tube Quick Detent Release Pin Ball FIGURE 8.3 Adjusting the Footboard Assembly - Depth Pronto® M61™with SureStep® Part No. 1139640...

  • Page 51: Section 9-Front Riggings

    2. Loosen the four hanger mounting screws and remove the two hangers (Detail “A”). 3. Loosen but DO NOT remove the three mounting screws on each side of the front rigging bracket which attach the bracket to the seat base (Detail “A”). Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 52: Removing Front Rigging Bracket

    6. Using the applicable mounting holes in the seat back brackets, install the mounting screws which were removed in STEP 3. Refer to Adjusting Seat Depth on page 41. 7. Install the seat. Refer to Removing/Installing the Seat Assembly on page 40. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 53 NOTE: The front rigging bracket mounting holes would be the same for all seat depths. Refer to Adjusting Seat Depth on page 41 to change the seat depth. FIGURE 9.1 Adjusting Front Rigging Bracket Position Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 54: Adjusting The Legrests

    A. Press and hold the unlocking button while installing the legrest onto the hanger. B. Release the unlocking button and ensure that the release button is installed firmly into the anchoring hole on the hanger. Unlocking Button Anchoring Release Hole Button Hanger Legrest FIGURE 9.2 Swivelling/Removing/Installing Legrest Pronto® M61™with SureStep® Part No. 1139640...

  • Page 55: Adjusting Legrest Angle

    Move the rubber stop to the desired position. 4. Re-tighten the counternut. 5. Refer to Adjusting Legrest Angle on page 55 to move the legrest to the desired position. Rubber Stop Counternut Legrest Adjusting Tube FIGURE 9.4 Setting Legrest End Stop Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 56: Adjusting Legrest Length

    2. Adjust to the desired depth. NOTE: Only the round holes are used for adjusting the calf plate depth. Do not use the oblong holes to set the calf plate depth. 3. Install the locknut and securely tighten. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 57: Adjusting Calf Plate Height

    NOTE: This procedure requires a 1 x 4 mm Allen wrench. 1. Use the Allen wrench to loosen the two mounting screws. 2. Adjust to the desired position. 3. Re-tighten the mounting screws. Height Adjustment Positions Mounting Screws FIGURE 9.7 Adjusting Calf Plate Height Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 58: Section 10-Top Shroud And Wheels

    3. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 40. 4. Remove the top shroud by pulling it up off the base frame. Installing 1. Pull joystick cable through the center hole in the top shroud. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 59: Engaging/Disengaging Motor Release Lever

    1. Locate the motor release handles on the motors protruding through the top shroud on the rear of the wheelchair. 2. Perform one of the following: • To Disengage the Motor Release Levers - Pull the motor lock lever towards the rear of the wheelchair (freewheel position). Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 60: Replacing Front/Rear Caster Assemblies

    1. Remove the mounting screw, two washers, and locknut that secures the caster to the fork. 2. Remove the caster and discard. 3. Secure new caster to fork with existing mounting screw, two washers and locknut (FIGURE 10.3). Securely tighten. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 61: Adjusting Forks

    5. Snap dust cover into the caster headtube ensuring that the tabs are under the plastic side shrouds. NOTE: Components exploded for clarity. There is no need to remove the fork from the base frame. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 62 SECTION 10—TOP SHROUD AND WHEELS Tabs Dust Cover Locknut Side Shroud Washer Caster Headtube Base Frame Washer Fork FIGURE 10.4 Adjusting Forks Pronto® M61™with SureStep® Part No. 1139640...

  • Page 63: Section 11-Batteries

    Determine source of contamination. Never install/reinstall a battery with a cracked or otherwise damaged case. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 64: Using The Proper Batteries

    Always use the battery handle when lifting the battery. It is the most convenient method and assures that the battery acid will not spill. It also helps to prolong the life of the battery. DO NOT tip the batteries. Keep the batteries in an upright position. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 65: Removing

    6. Reinstall the top shroud. Refer to Removing/Installing the Top Shroud on page 58. 7. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40. 8. Connect joystick cable (not shown). Refer to Disconnecting/Connecting the Joystick on page 74. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 66: Connecting/Disconnecting Battery Cables

    To replace the fuse, obtain and replace battery harness with fuse. The POSITIVE (+) battery cable MUST connect to the POSITIVE (+) battery terminal, otherwise serious damage will occur to the electrical system. The use of rubber gloves is recommended when working with batteries. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 67 Battery Tray on page 64. NOTE: New batteries MUST be fully charged before using, otherwise the life of the batteries will be reduced. 6. If necessary, charge the battery. Refer to Charging Batteries on page 69. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 68 NEGATIVE (-) Battery POSITIVE BLACK Terminal (+) Battery Connector to Terminal Controller Tie- Plug into wraps BLACK controller U1 Battery Connectors U1 Batteries NOTE: Handles on batteries removed for clarity. FIGURE 11.3 Connecting/Disconnecting Battery Cables Pronto® M61™with SureStep® Part No. 1139640...

  • Page 69: Disconnecting Battery Cables

    Doing so will reduce the life of the batteries. Read and carefully follow the individual instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for proper procedures. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 70: Battery Charger Operation

    The independent charger is NOT supplied with the wheelchair. 1. Attach the battery charger connector to the charger port on the front of the joystick. 2. Plug the charger’s AC power cord or extension into the grounded 230-volt wall outlet. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 71 SECTION 11—BATTERIES 3. When charging is complete, turn charger off. 4. Disconnect output cable from joystick charger port. Independent Charger Port (Charger NOT supplied) FIGURE 11.4 Battery Charger Operation Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 72: Section 12-Electronics

    2. Tighten the adjustment lock lever to secure the joystick mounting tube to the mounting bracket on the other arm. 3. Tie-wrap the joystick cable to the arm as shown in FIGURE 12.1. 4. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 74. Pronto® M61™with SureStep® Part No. 1139640...

  • Page 73: Repositioning The Joystick

    NOTE: The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame. 5. Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame. Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 74: Disconnecting/Connecting The Joystick

    1. Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and align them. 2. Lightly push to engage the joystick connector and the controller connector. Pronto® M61™with SureStep® Part No. 1139640...
  • Page 75 SECTION 12—ELECTRONICS Joystick Office Style Seat Controller Connector Joystick Cable Light Grey Collar Joystick Connector FIGURE 12.3 Disconnecting/Connecting the Joystick Part No. 1139640 Pronto® M61™with SureStep®...

  • Page 76: Section 13-Accessories

    3. Thread the mounting knob into the welded nut on the accessory tube. Securely tighten. 4. Align slot on base with hook on crutch/cane holder and slide base down into position. Seat Crutch/Cane Holder Accessory Tube Hook Mounting Knob Base FIGURE 13.1 Installing/Removing the Crutch/Cane Holder Pronto® M61™with SureStep® Part No. 1139640...
  • Page 77 SECTION 13—ACCESSORIES NOTES Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 78 SECTION 13—ACCESSORIES NOTES Pronto® M61™with SureStep® Part No. 1139640...

  • Page 79: Limited Warranty

    IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN. INVACARE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS. Part No. 1139640 Pronto® M61™with SureStep®...
  • Page 80 Elyria, Ohio USA Route de Saint Roch Yes, you can. and SureStep are registered 44036-2125 37230 Fondettes trademarks of Invacare Corporation. M61 is a trademark of Invacare 1-800-333-6900 Tel: 02 47 62 64 66 Corporation. © 2005 Invacare Corporation Part No. 1139640...

Table of Contents