Adjusting Seat Depth - Pronto M61 Owner's Operator And Maintenance Manual

Adjusting Seat Depth

NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 40.
2. Remove the six mounting screws located under the seat that secure the seat back
assembly in place.
3. Adjust seat back assembly to desired position and reinstall the six mounting screws.
Securely tighten.
NOTE: Refer to Detail "A" of FIGURE 7.4 for proper seat depth positions. For example, to achieve
maximum seat depth, the front mounting hole on the seat back bracket aligns with the third hole
on the seat base.
4. Reinstall the seat base onto the seat assembly. Refer to Adjusting Seat Position on Seat
Base on page 43.
5. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40.
Seat Back Bracket
Seat
Base
Mounting
Holes
Seat Back
Part No. 1139640
Mounting Screws
FIGURE 7.4 Adjusting Seat Depth
DETAIL "A" - SEAT DEPTH POSITIONS
Seat Depth Seat Size
46 cm
46 cm
51 cm
51 cm
41
SECTION 7—SEAT
Minimum Seat Depth
Seat Depth Seat Size
40 cm 40 X 46 cm
40 cm 46 X 46 cm
46 cm 51 X 51 cm
46 cm 56 X 51 cm
Middle Seat Depth
Seat Depth Seat Size
43 cm 40 X 46 cm
43 cm 46 X 46 cm
48 cm 51 X 51 cm
48 cm 56 X 51 cm
Maximum Seat Depth
40 X 46 cm
46 X 46 cm
51 X 51 cm
56 X 51 cm
Pronto® M61™with SureStep®