Using The Horn; Elevating The Seat - Pronto M61 Owner's Operator And Maintenance Manual

Using the Horn

NOTE: For this procedure, refer to
FIGURE 5.4.
1. Press the horn button located in the
center of the speed indicator. The horn
will sound for as long as the button is
pressed.

Elevating the Seat

DO NOT operate wheelchair on an incline while in an elevated position. Otherwise,
the wheelchair may tip over and injury or damage may occur.
DO NOT operate the elevate function near or under a fixed object such as a table
or desk.
Pinch points may occur when lowering the elevating seat. Make sure the hands and
body of the occupant, attendants and bystanders are clear of all pinch points before
lowering seat.
Use only the controller supplied with the wheelchair to activate the elevate
function. DO NOT use any other actuator controls. Such devices may result in
excess heating and cause damage to the actuator and associated wiring and could
cause a fire, death, physical injury or property damage. If such devices are used,
Invacare shall not be liable and the limited warranty is void.
The elevated seat option is equipped with a speed reduction safety mechanism.
While the seat is in an elevated position, the safety feature slows the speed of the
wheelchair by 80%. If the wheelchair operates at maximum speed while in an ele-
vated position, DO NOT operate the wheelchair. Have the wheelchair serviced
immediately by a qualified technician.
NOTE: For this procedure, refer to FIGURE 5.5.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward - Elevates the seat.
• Backward - Lowers the seat.
Part No. 1139640
SECTION 5—WHEELCHAIR OPERATION
FIGURE 5.4 Using the Horn
WARNING
31
Horn
Button
Pronto® M61™with SureStep®