Disconnecting/Connecting The Joystick; Disconnecting; Connecting - Pronto M61 Owner's Operator And Maintenance Manual

SECTION 12—ELECTRONICS
6. If necessary, perform the following to reposition the adjustment lock:
A. Slide the adjustment lock from the mounting bracket.
B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the
mounting bracket.
7. Slide joystick mounting tube through the mounting bracket to the desired position
and secure adjustment lock to tube by turning lever on adjustment lock.
Armrest
Plate
Locknuts

Disconnecting/Connecting the Joystick

NOTE: For this procedure, refer to FIGURE 12.3.

Disconnecting

1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and disconnect them by pulling
them apart.

Connecting

The joystick connector and controller connector fit together in one way only. DO
NOT force them together.
1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and align them.
2. Lightly push to engage the joystick connector and the controller connector.
Pronto® M61™with SureStep®
Mounting Bracket
Adjustment
Lock Lever
Spacers
FIGURE 12.2 Repositioning the Joystick
WARNING
Hex Mounting Screws
Mounting Holes
on Arm Frame
74
Part No. 1139640