Adjusting The Arms; Adjusting Width; Adjusting Angle - Pronto M61 Owner's Operator And Maintenance Manual

Adjusting the Arms

Adjusting Width

NOTE: For this procedure, refer to FIGURE 6.2.
1. Loosen the two lock knobs that secure the arms to the arm support tube.
NOTE: Both arms should be adjusted to the same distance away from the arm support tube.
NOTE: Changing the width of the arms may also affect the overall width of the wheelchair.
2. Reposition the arms until desired width is achieved.
3. Securely tighten the two lock knobs that secure the arms to the arm support tube.

Adjusting Angle

WARNING
Pinch point may occur when adjusting
the arm angle position.
NOTE: For this procedure, refer to
FIGURE 6.3.
1. Lift up the arm pad.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to
the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite arm pad, count the exposed threads after
the jam nut has been tightened.
Part No. 1139640
Seat
Lock
Arm Support
Knob
Tube
FIGURE 6.2 Adjusting Width
Count Exposed Thread
37
SECTION 6—ARMS
Arm Pad
Arm Pad
Adjustment
Screw
Jam Nut
FIGURE 6.3 Adjusting Angle
Pronto® M61™with SureStep®
Pinch Point