Openstage M3 Ex Plus; Using The Battery Pack For Openstage M3 And Openstage M3 Plus - Siemens HiPath 3000 Operating Instruction

Hide thumbs Also See for HiPath 3000:
Table of Contents

Advertisement

Safety notes
Using OpenStage M3, OpenStage M3 Plus,
OpenStage M3 Ex and OpenStage M3 Ex Plus
Using the battery pack for OpenStage M3 and
OpenStage M3 Plus
4
Attention:
Do not use OpenStage M3 and OpenStage M3 Plus handsets
in potentially explosive environments!
Please observe local safety regulations when using the handset.
The ringer, signal tones and handsfree talking (speakerphone
mode) are played over the loudspeaker. Do not hold the handset
to your ear when it rings, when a signal tone is emitted or if
speakerphone mode is switched on. Otherwise you may
seriously and permanently impair your hearing.
A transmitter signal is emitted by your handset. Please observe
local safety regulations.
Handsets can interfere with the operation of medical
equipment. Please observe the technical requirements of the
relevant environment (hospital, for instance).
The handset can cause unpleasant humming in hearing aids.
Caution:
To avoid mutual interference, do not operate the handset in the
vicinity of electronic equipment.
Only use the charging shell provided to charge the handset.
If you give your handset to someone else, remember to include
the operating manual with it.
Attention:
Only use the original battery pack from the manufacturer of the
OpenStage M3/OpenStage M3 Plus!
Do not use a standard rechargeable battery pack. This can result
in serious injury and material damage (risk of explosion,
degradation of battery pack cladding, functional interference and
handset damage).
Avoid contact with fire and water.

Advertisement

Table of Contents
loading

Table of Contents