Conducting Calls - The Basic Functions; Activating/Deactivating The Handset - Siemens HiPath 3000 Operating Instruction

Step by Step
Please enter
PIN:
Conducting calls – the basic
functions
You can use your handset to make both internal and
external calls.
Internal calls are calls that
• you make within the range of a communications
system, for example, within your company,
• you make between networked communications
systems, for example, to different company
locations.
External calls are calls that you conduct with users of
the public telephone network.

Activating/deactivating the handset

a Press the On-hook key until the activation or
deactivation is confirmed by a signal.
PIN
If the default PIN has not been changed (0000), the
handset is ready for operation as soon as it is switched
on. If a PIN was set, it must be entered before the
handset can be operated.
o
Enter the PIN.
[
Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in idle status:
|
Flashing, no reception
Ò
Low receive field strength
Ñ
50% receive field strength
i
75% receive field strength
Ð
100% receive field strength
The radio range is different indoors and outdoors
 page 166. Please consult your system administrator
in the event of range problems.
Conducting calls – the basic functions
29