Callback - Siemens HiPath 3000 Operating Instruction

Step by Step

Callback

This function enables you to call a user who does not
answer or whose line is busy. The Callback function
enables you to contact him as soon as he hangs up or
re-uses his telephone. Please note that a line is
signalled as busy when it is being called by another
user. You can continue to use your handset without
restriction when a callback has been booked.
You can also send a callback request as a message
 page 98. This function can also be called by entering
the code  page 145.
Booking a callback
p
The number is dialled. You hear the busy tone or the
user does not answer.
Save the callback request.
Callbck
a Press the On-hook key to end the operation.
You receive a callback
You will receive the callback as soon as the user you
want has hung up or the first time he uses his
telephone. The following appears on your handset
display "Callback:...".
c or d Press the Talk or Speakerphone key briefly. The
connection is set up.
Conducting calls – the basic functions
Callbacks are repeated until a connection is
established or until the callback is deleted. A
handset can initiate up to five callbacks and can
be the destination for up to five callback
requests. If these conditions are met, any
further callbacks are rejected.
33