Siemens HiPath 3000 Operating Instruction page 135

Step by Step
u v
Ï
Settings
s t
Display + Keypad
s t
Backlight
u v
Ï
Settings
s t
Display + Keypad
s t
Keypad Illumination
Illumination
Can only be set if this menu item is visible. To set,
see  page 137.
You can set whether the display should light up when
the handset is in or out of the base/charging shell. If it is
activated, the display stays dimmed. When the display
backlight is disabled, the display lights up again the next
time any key is pressed, without any other keystroke
action.
This setting impacts the battery life.
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
In charger:
u v
Activate or deactivate.
Out of charger:
s
Move the cursor down one line.
u v
Activate or deactivate.
Save setting.
Save
Setting keypad illumination
You can activate and deactivate keypad illumination.
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
Select the menu item.
³
Press the display key.
Edit
(
= on).
Rotating the display automatically
Only OpenStage M3 Plus and OpenStage M3 Ex Plus!
Setting the handset
135