Cleaning The Handset - Siemens HiPath 3000 Operating Instruction

Hide thumbs Also See for HiPath 3000:
Table of Contents

Advertisement

Cleaning the handset

Removing everyday dirt
To clean the handset and the charging shell, simply wipe them with a damp
or anti-static cloth. Never use a dry cloth.
Do not use abrasive cleaning agents.
After contact with liquids
1. Deactivate the handset immediately. Do NOT activate it!
2. Remove the batteries immediately. Leave the battery compartment
open.
3. Allow the liquid to drain off:
– Hold the handset in a horizontal position with the open battery
compartment facing down.
– Hold the handset in a vertical position with the open battery
compartment facing down. Shake the handset gently, slightly tilting
it back and forth.
– Dab all components dry and then leave the handset in a warm spot
(other than a microwave, oven, etc...) for at least 72 hours with open
battery compartment and keypad facing down.
When it has fully dried out, you will usually be able to use it again.
Storage
To avoid damage, the handset should not be stored with sharp objects,
such as knives or tools, etc. We recommend using a protective pouch
 page 168.
Appendix
165

Advertisement

Table of Contents
loading

Table of Contents