Operating Instructions; Alarm Functionality - Siemens HiPath 3000 Operating Instruction

Operating instructions

These operating instructions describe your handset and its functions on
your communications system.
All functions that can be performed via your handset are described here. If
some of the required functions are not available on your handset, it may be
due to one of the following:
• The function is not configured for you or your handset - please contact
your system administrator.
• Your communications platform does not feature this function - please
contact your contract partner for the communications system.

Alarm functionality

Only for OpenStage M3 Plus and OpenStage M3 Ex Plus!
OpenStage M3 Plus and OpenStage M3 Ex Plus offer personal alarm
functionality with voice communication capability. A device with this
functionality is also described in abbreviated form as PNG (personal alarm
device) or as PNG-S (personal alarm device with voice communication
capability).
A manual alarm can be triggered via an alarm key. Sensors detect non
movement, man down and escape states, which can be signalled as
automatic alarms.
An integrated time alarm function is used to determine whether the
person being monitored is still responsive. A pull cord is used to check
whether the OpenStage M3 Plus is still on the monitored person.
OpenStage M3 Plus and OpenStage M3 Ex Plus optionally monitor the
following operating functions:
• Battery charging
• Synchronicity with DECT base
• Communication with an alarm server
A technical warning is reported on the handset in the event of a
malfunction.
For more information on the alarm functionality please refer to Kapitel ,
"Personal alarm functionality".
Operating instructions
13