Siemens HiPath 3000 Operating Instruction page 82

Conducting calls – with multiple users
Step by Step
> <
Exit list?
> <
View conf parties?
> <
Remove party?
> <
Withdraw?
82
>
View other parties.
Closing the conference party list
Open the additional menu.
Mnu
[
Select the menu item and confirm. The conference
party list is closed.
or
Press the display key to close the list.
Disconnecting a party from the conference
As the convener of the conference, you can disconnect
users from the conference.
p
You are connected with two or more partners in a
conference call.
Open the system menu.
Menu
[
Select the menu item and confirm. The first party is
displayed.
>
Display the required party.
Select the menu item and confirm.
Mnu
[
Select the menu item and confirm. The relevant party is
disconnected from the conference.
Connecting parties
As the conference convener, you can leave the
conference and thereby connect the other parties with
each other. If you were previously connected with two
or more parties, the other parties remain in a
conference. Otherwise, the remaining two users
conduct a one-to-one call.
p
You are connected with two or more partners in a
conference call.
Open the system menu.
Menu
[
Select the menu item and confirm. The first party is
displayed.
a Press the On-hook key. You leave the conference; the
remaining parties are connected with each other.