Setting The Conversion List For Vcard Transfer; Setting The Menu View - Siemens HiPath 3000 Operating Instruction

Step by Step
u v
Ï
Settings
s t
Telephony
s t
Area Code
u v
Ï
Settings
s t
Menu View
Setting the conversion list for vCard
transfer
Can only be set if this menu item is visible. To set,
see  page 137.
See also Gigaset QuickSync  page 115,
Phone numbers are usually specified as follows in e-
mail programs, such as Microsoft Outlook for example:
+49 (30) 11111111. The handset is unable to use this
format, however, to dial the phone number. If the phone
number above is a local fixed network number, it is
converted to 011111111, for instance, when dialled. The
conversion pairs are defined in the conversion table and
can be modified if they deviate from the default values.
Consult your system administrator about the
conversion rules that apply to your handset.
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The conversion
table is displayed.
o
Change entry
Press the up/down control key to navigate to another
input field; Press the left/right control key to move the
cursor within an input field.
Save setting.
Save
a Press the On-hook key to end the operation.

Setting the menu view

You can decide whether only a selection of the most
important menu items or all menu items are to be
shown in the menus.
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
Setting the handset
137