Siemens HiPath 3000 Operating Instruction page 57

Hide thumbs Also See for HiPath 3000:
Table of Contents

Advertisement

Step by Step
s t
Send List
s t
Send Entry
> <
Service?
> <
Load list buffer?
Either:
[
Select the menu item and confirm.
Or:
[
Select the menu item and confirm.
then:
o
Enter the station number. The following phone numbers
are possible:
1... 98 – the list or entry is sent directly to the
recipient's handset.
00 – the list or entry is sent to the communications
system and can then be downloaded by any
handset.
99 – The list or entry is sent to the communications
system and can then only be downloaded by your
handset.
[
Confirm your entry. The list or entry is sent.
If a phone number from 1 to 98 was dialled, the list or
the entry is automatically received by the recipient's
handset.
Loading a list or entry from the communications
system
Prerequisite: You sent an entry or list to the
communications system by dialling the phone number
00 or 99.
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
a Press the On-hook key once. You will receive a call from
the system and the transfer starts once you answer this
call.
Deleting a list or entry in the communications
system
Prerequisite: A currently unused list or entry is saved on
the communications system.
c or d Press and hold the Talk or Speakerphone key.
Conducting calls – enhanced functions
57

Advertisement

Table of Contents
loading

Table of Contents