Abs Set-Up - Ducati hipermotard 2016 Owner's Manual

ABS Set-Up

This function allows customizing the ABS (Antilock
Braking System) intervention level and possibly
disabling it. To display the function, enter the setting
Menu and access the R.MODE page.
Then use buttons (1) and (2) to select the riding mode
to change and press button (4). Use buttons (1) and
(2) to select ABS and press button (4) to enter the
settings. Then, use buttons (1) and (2) to increase or
decrease the ABS level and press button (4) to
confirm the new level.
The possible settings are 01, 02 and OFF.
Note
By setting OFF, the ABS will be disabled and the
relevant warning light will start flashing.
Once the new setting is selected, press button (4).
The instrument panel automatically highlights the
"MEMORY" item; to actually save the new setting,
keep button (4) pressed for 3 seconds;
After 3 seconds, the instrument panel displays
"MEMORIZED" for 2 seconds to confirm that the new
setting is active. "EXIT" will be automatically
highlighted; press button (4) to quit and go back to the
setting menu.
Note
When setting the ABS OFF, Ducati
recommends paying particular attention to the riding
style and the braking mode.
Note
On the right side of the DEFAULT item, a
symbol indicates that the active settings are the
default ones, and so the parameters are those set by
Ducati.
91