Helmet Cable - Ducati hipermotard 2016 Owner's Manual

Helmet cable

Remove the seat as described in paragraph "Seat lock
page 157" .
Remove the cable (1) from the seat.
Pass the cable (1) through the helmet and insert one
end of the cable in the frame pins (2) as shown in the
figure.
Leave the helmet hanging and refit the seat to hold it
in place.
Attention
This device protects the helmet against theft
when the motorcycle is parked. Do not leave the
helmet attached when riding the motorcycle; it could
interfere with your movements and cause loss of
control of the motorcycle.
1
1
Fig 103
2
Fig 104
159