Main Use And Maintenance Operations; Checking Coolant Level And Topping Up, If Necessary - Ducati hipermotard 2016 Owner's Manual

Main use and maintenance
operations
Checking coolant level and topping up, if
necessary
Check coolant level in the expansion tank on the right
side of the steering tube. Steer completely to the left
and check that the level is between the MIN and MAX
marks on the side of the expansion reservoir. Top up
if the level is below the MIN mark. Unscrew the filler
plug (1) and add ENI Agip Permanent Spezial
antifreeze (do not dilute, use pure), until reaching the
MAX level. Screw plug (1). This type of mixture
ensures the best operating conditions (the coolant
starts to freeze at -4 °F/-20 °C).
178
1
Cooling circuit capacity: 0.63 gallons (2.4 cu. dm
liters)
Attention
This operation must be performed with cold
engine. Failure to observe the above
recommendation may lead to coolant or hot vapor
leakage with possible consequent severe burns.
MAX
MIN
Fig 123