Dtc Set-Up - Ducati hipermotard 2016 Owner's Manual

DTC Set-Up

This function customizes the intervention level of the
DTC (Ducati Traction Control) and allows disabling it.
To display the function, enter the setting Menu and
access the R.MODE page.
Then use buttons (1) and (2) to select the riding mode
to change and press button (4).
Use buttons (1) and (2) to select DTC and press
button (4) to enter the settings.
Then, use buttons (1) and (2) to increase or decrease
the DTC level and press button (4) to confirm the new
level.
The possible settings are from 01 to 08 and OFF.
Note
By setting OFF, the DTC will be disabled.
Once the new setting is selected, press button (4).
The instrument panel automatically highlights the
"MEMORY" item; to actually save the new setting,
keep button (4) pressed for 3 seconds. After 3
seconds, the instrument panel displays
"MEMORIZED" for 2 seconds to confirm that the new
setting is active.
"EXIT" will be automatically highlighted; press button
(4) to quit and go back to the setting menu.
Note
On the right side of the DEFAULT item, a
symbol indicates that the active settings are the
default ones, and so the parameters are those set by
Ducati.
89