Ducati hipermotard 2016 Owner's Manual page 125

(SPEED) setting
This function allows you to change the units of
measurement of the indications: Vehicle speed,
Odometer, Trip 1, Trip2, Trip Fuel (when active) and
Average Speed.
Once "SPEED" is selected, press button (4).
Then, the instrument panel will highlight the unit of
measurement currently in use. Press button (1) or (2)
to scroll among the available units of measurement
(Km/h and mph). Once the units of measurements to
be set have been selected, press button (4) again.
The instrument panel automatically highlights the
"MEMORY" item; to actually save the new unit of
measurement, keep button (4) pressed for 3
seconds.
After 3 seconds, the instrument panel displays
"MEMORIZED" for 2 seconds to confirm that the new
setting is active.
"EXIT" will be automatically highlighted; press button
(4) to quit and go back to the setting menu.
KM/H: if this unit is set, the following values will have
the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: km
- Vehicle speed and SPEED AVG: km/h
MPH: if this unit is set, the following values will have
the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: miles
- Vehicle speed and SPEED AVG: mph
Note
When the current settings are the default ones,
on the "DEFAULT" indication right side the display
shows a symbol (a circle with a dot).
123